New handle is up for grab! This one is ideal for a gyuto of 240mm but can be nice between 220~250mm. This maple burl is really beautiful and this is one of my most beautiful handles that I have made so far. If you want it, just reach me via DM!
Price - 100$CAD + shipping
Material - Stabilized maple burl & ebony
Shape - Octogonal
Height [front to back] - 23,7 to 26
Width [front to back] - 17,9 to 19,7
Tang opening - 3,6 x 12
Tang depth - 96,2
Length - 141
Weight - 55g
Finition - 400 grit and polymerized linseed oil
ADJUSTING THE OPENING
You will need to adjust the opening accordingly for the tang of your knife. To fine tunes the opening I recommend using a rasp or a file.
INSTALLATION
I highly recommend using epoxy to install my handle. The tang heating method is not suitable for this type of construction because the bonding is made from epoxy. The high heated temperature of the tang can soften the glue and cause breakage. Of course feel free to contact me if you want some help!
Price - 100$CAD + shipping
Material - Stabilized maple burl & ebony
Shape - Octogonal
Height [front to back] - 23,7 to 26
Width [front to back] - 17,9 to 19,7
Tang opening - 3,6 x 12
Tang depth - 96,2
Length - 141
Weight - 55g
Finition - 400 grit and polymerized linseed oil
ADJUSTING THE OPENING
You will need to adjust the opening accordingly for the tang of your knife. To fine tunes the opening I recommend using a rasp or a file.
INSTALLATION
I highly recommend using epoxy to install my handle. The tang heating method is not suitable for this type of construction because the bonding is made from epoxy. The high heated temperature of the tang can soften the glue and cause breakage. Of course feel free to contact me if you want some help!
