• If you have bought, sold or gained information from our Classifieds, please donate to Kitchen Knife Forums and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD Miyazaki project hakata

Kitchen Knife Forums

Help Support Kitchen Knife Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Apr 27, 2021
Messages
1,836
Reaction score
3,031
Location
San Francisco
Kipp workpony 230x52 199g
500 shipped
This came to me with an (IMo) ugly forced patina and some scratches from sharpening. I sanded it with 2000 grit sandpaper to remove it, but it’s still a little rough finish wise.

Takamura Hana Suji
169g
240x37
600 shipped?

Still has OOTB edge, still sharp. Not much else to say.


Miyazaki Hakata
200x50 (at heel)
185g
Blue super with twist damascus of various metals.

200 shipped

Homebutcher special. Tried cutting and the heavily etched finish was draggy. Decided to try polishing. Handle is epoxied on and won’t come off. 75% through 600 grit right now. Will cut good but looks pretty scratchy as is. Haven’t made progress on this project so selling it for a low price.

Dammy has some inclusions and voids as expected of scrap steel damascus. Bevels are actually pretty evenly ground, although the tip is overground.
 

Attachments

  • IMG_8140.jpeg
    IMG_8140.jpeg
    1.6 MB
  • IMG_8141.jpeg
    IMG_8141.jpeg
    1.6 MB
  • IMG_8142.jpeg
    IMG_8142.jpeg
    809.1 KB
  • IMG_8143.jpeg
    IMG_8143.jpeg
    2 MB
  • IMG_8144.jpeg
    IMG_8144.jpeg
    2.1 MB
  • IMG_8145.jpeg
    IMG_8145.jpeg
    998.6 KB
  • IMG_8146.jpeg
    IMG_8146.jpeg
    1.4 MB
  • IMG_8147.jpeg
    IMG_8147.jpeg
    1.3 MB
  • IMG_8148.jpeg
    IMG_8148.jpeg
    2.3 MB
Last edited:
Back
Top