Hello All,
This is my first on-custom MagnaCut blade in a while, and it has a profile I don't think I've ever made outside of customs either. It's very thin with good convexity and it's nail flexing at the edge. The neck is flush fit with the end of the handle for a smooth transition and the curly walnut hand has been fully oil sealed and waxed. The is a slight imperfection in the "C" of the maker's mark from the vinyl stencil becoming detached from the blade during etching, but it's extremely shallow.
Blade: 229mmx57mm MagnaCut (63 hrc) belt finish
Neck: 22mmx17mm
Handle: 137mm long, 22mm x 25mm tapering to 18mm x 21mm, curly walnut, oil finished and waxed
POB: 45mm from the handle, or at the "C" in the marker's mark
Spine: 2.49mm at the handle, 2.26mm at halfway, .65mm 1cm from the tip
Grind: flat to convex RH bias
Weight: 159g
Relieved choil and spine
Edge: .16mm@1mm, .25mm@2mm, .44mm@5mm, .69mm@10mm from the edge, measured at the midpoint,
Asking $385 U.S + $25 shipping. As always, if this blade is purchased in conjunction with another I will happily deduct $25 off of the price of the other blade.
Thanks for looking!
-Matt
This is my first on-custom MagnaCut blade in a while, and it has a profile I don't think I've ever made outside of customs either. It's very thin with good convexity and it's nail flexing at the edge. The neck is flush fit with the end of the handle for a smooth transition and the curly walnut hand has been fully oil sealed and waxed. The is a slight imperfection in the "C" of the maker's mark from the vinyl stencil becoming detached from the blade during etching, but it's extremely shallow.
Blade: 229mmx57mm MagnaCut (63 hrc) belt finish
Neck: 22mmx17mm
Handle: 137mm long, 22mm x 25mm tapering to 18mm x 21mm, curly walnut, oil finished and waxed
POB: 45mm from the handle, or at the "C" in the marker's mark
Spine: 2.49mm at the handle, 2.26mm at halfway, .65mm 1cm from the tip
Grind: flat to convex RH bias
Weight: 159g
Relieved choil and spine
Edge: .16mm@1mm, .25mm@2mm, .44mm@5mm, .69mm@10mm from the edge, measured at the midpoint,
Asking $385 U.S + $25 shipping. As always, if this blade is purchased in conjunction with another I will happily deduct $25 off of the price of the other blade.
Thanks for looking!
-Matt
Attachments
Last edited:
