HSC /// Knives
KKF Supporting Craftsman
I finally had some time to sort out W2 HT and so here are the first 3 knives available.
Offered at very good prices since it's my first W2.
I have more W2 and plan to forge out any future blades.
all these are stock removal blades.
I heat treated them all, 62-63 RC hardness.
blades are working finish, lengthwise scratches
prices as shipped USA priority mail with signature confirmation required.
int'l at cost,
1) W2 freestyle - $260
178x41
bog oak frame handle of black G10
2) W2 prep freestyle - $240
146x46
handle of East Indian rosewood and frame handle black G10
spine 2.7 at heel. 2.5 halfway , .7 at 1 CM from tip. So it’s not super thin but it gets thin at the tip ...it has a little bit of flex at the tip but it’s a little bit more rigid overall
3) sold - W2 gyuto 9.45" - $340
240x54
2.75->2->1.2 (spine measurements are at heel - > mid point - > 1" from tip.)
spalted hackberry frame handle of black G10
Offered at very good prices since it's my first W2.
I have more W2 and plan to forge out any future blades.
all these are stock removal blades.
I heat treated them all, 62-63 RC hardness.
blades are working finish, lengthwise scratches
prices as shipped USA priority mail with signature confirmation required.
int'l at cost,
1) W2 freestyle - $260
178x41
bog oak frame handle of black G10
2) W2 prep freestyle - $240
146x46
handle of East Indian rosewood and frame handle black G10
spine 2.7 at heel. 2.5 halfway , .7 at 1 CM from tip. So it’s not super thin but it gets thin at the tip ...it has a little bit of flex at the tip but it’s a little bit more rigid overall
3) sold - W2 gyuto 9.45" - $340
240x54
2.75->2->1.2 (spine measurements are at heel - > mid point - > 1" from tip.)
spalted hackberry frame handle of black G10
Last edited: