- Joined
- Aug 29, 2018
- Messages
- 2,415
- Reaction score
- 5,387
$60 shipped
241mm edge
50mm tall
2.2mm to 1.6mm halfway to 0.7mm 1cm from tip
184g
Laser, was reground by seller I bought from. Sadly mostly flat ground, though I can grind in a light convex if desired, will take some time.
Tapered tang. Straightened. Steel feels very approachable . . . Similar to Ashi white 2 regular hardness.
MiSONO logo as opposed to modern MISONO with the stylized M in a box. I've never seen this logo version before, and bought it for the kurouchi in the kanji and letters. Stray scratches, Pitting, slight overgrind on left side on sander, near middle of blade -- deeper vertical mark. Slight handle gap near ferrule. Uneven chamfer of spine on right side.
241mm edge
50mm tall
2.2mm to 1.6mm halfway to 0.7mm 1cm from tip
184g
Laser, was reground by seller I bought from. Sadly mostly flat ground, though I can grind in a light convex if desired, will take some time.
Tapered tang. Straightened. Steel feels very approachable . . . Similar to Ashi white 2 regular hardness.
MiSONO logo as opposed to modern MISONO with the stylized M in a box. I've never seen this logo version before, and bought it for the kurouchi in the kanji and letters. Stray scratches, Pitting, slight overgrind on left side on sander, near middle of blade -- deeper vertical mark. Slight handle gap near ferrule. Uneven chamfer of spine on right side.
Last edited: