Selling this Ohira Kiita from JMS, because I have a similar stone.
205 mm x 75 mm x 43 mm
1650g
Grit 8k+
Hardness 3-3.5
Light & Shiny Finish
Fast speed
Crack can be ignored
Can be used as final finisher
Sealed
Price: 400€
Prices is not with shipping, can be shipped worldwide.
I’m...
Hey,
Im Selling my Nakayama Kiita Suita just because I bought a new bigger one.
181x70x22mm
660g
Hardness 4.5
Can be used as final finisher or for polishing.
Leaves a shiny finish with good contrast.
Pretty fast and fine Stone
There is still a number stamp on the backside but it’s almost faded...
Hey,
Im selling this Shapton Glass Stones. They are almost they and less than 5 times used. So they all have still the original height.
Shapton Glass HR 1000, 14.7 micron, 21 cm - 35€
Shapton Glass HR 4000, 3.68 micron, 21 cm - 40€
Shapton Glass HR 6000, 2.45 micron, 21 cm - 50€
Shapton Glass...
Been trying to get good at sharpening on whetstones for a while and just never got the hang of it. Deciding to get an easier system like the worksharp.
Stones have barely been used. Trying to sell as a lot all at once.
In order in the picture:
Shapton #220 Glass Sharpening Stone HR (this one...
I'm Selling my Suehiro splash and go 300/1500 combination whetstone. Comes with plastic base like in the picture & small nagura. 1500 grit side will give you mirror finish to your blade/ edge. Unlike cerax, this stone is true splash and go.
Used it couple of times.
AUS$ 75 including PayPal...
Gday people,
Putting out a bit of a feeler. wondering if anybody in AUS had either of these stones they potentially wanted to let go. Don’t really want to buy internationally as it’s quite a hassle.
Either of these 2 would be cool.
Morihei hishiboshi 1000 grit.
Imanishi arashyama 1000...
There is a lot of knowledge here about the SG stones from some very knowledgeable people. However, there seems to be contradictory opinions out there. Some say it's slightly softer than the Kuromakus. Some say it's softer than the Naniwa pros and on the softer side of SNG stones. I have even...
i have a 1000 and 3000 grit... theres a sale for stones on mtckitchen and i was wondering if theres any others i should get. Most people said going beyond 3000 even for my sg2 knives is pointless. Anyone have an opinion if i were to get another one?
I was recommended to get a 3000 grit whetstone to touch up my sg-2 and vg-10 knives. However Shapton only makes 3000 grit on their glass stones and not the ceramic/pro line. They do have their ceramic stones in the 5000 grit. should i just go with that one? Another option is a King stone at 4000...
So, I talked to Jon, the owner of Japanese Knife Imports in california, and he told me that ceramic honing rods aren't good for your knife. I forget exactly why but he was pretty passionate about it and went into specifics that went over my head.
So my question is, what's the best way to touch...
i have two SG2/R2 knives and I was told to get a polishing whetstone for touch ups and well. polishing. I currently only have a 1k grit shapton stone. what else should i get?
i have two SG2/R2 knives and I was told to get a polishing whetstone for touch ups and well. polishing. I currently only have a 1k grit shapton stone. what else should i get?
So, newbie to j-knives here. I read that you want to get a ceramic rod with them instead of a steel steel. Question is, what grit do you get? I normally see them at 1000,1500,2000. I was looking at the
CKTG Black Ceramic Sharpening Rod 270mm
from CKTG with stellar reviews that is a 2k grit...