Nihei experience

Kitchen Knife Forums

Help Support Kitchen Knife Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
May 18, 2023
Messages
803
Reaction score
1,356
Location
Rome, Italy
Hello all!
I finally had the chance to try a kono sumiiro today and I'm blown away on how it cuts, surpassing maybe my best Yoshi skd but still have to compare them directly. Ootb edge is ridiculous.
I would like to know if any you did try the shinkiro also from nihei and how they compare besides steel and finish.
The shinkiro seems thicker overall but with a very capable grind.
Let me know thanks!
 
IMG_2306.jpeg


IMG_2210.jpeg

I recently picked up a kono sumiiro and though i haven’t had it long enough to comment on edge retention, the steel/edge is far more bitey off a BBW than any of the stainless steels I’ve tried otherwise. Near perfect thin convex geometry. I’d be curious to get vibe checks on a shinkiro as well since the only AS I’ve liked so far has come from Tanaka, and most other offerings are OEM/Takefu prelaminated stuff.
 
Sumiiro is a great Konosuke product. Grab it more than my other Konos. Maybe because I don’t have to wipe it often, lol. Been disciplined about not “needing” another Nihei so this thread might be counterproductive to me, hahaha.
 
I've got the non konosuke version of the sumiiro, afaik it's just a nashiji finishing versus ku.

Imo the f&f is even better than sumiiro. However, the edges tend to roll a bit, but would come back straight with a few strops
 
Is the petty thick behind the edge? The choil shots on the Protooling site make it look a little chunky, but the reviews seem to be positive. Tossing up between an sumiiro petty and a takamura petty as my stainless fruit knife.
 
Is the petty thick behind the edge? The choil shots on the Protooling site make it look a little chunky, but the reviews seem to be positive. Tossing up between an sumiiro petty and a takamura petty as my stainless fruit knife.
It’s probably thin BTE but because it’s thick spined I would recommend takamura (I’ve had both btw)
 
It’s probably thin BTE but because it’s thick spined I would recommend takamura (I’ve had both btw)
Also had/have both and would recommend Sumiiro. 😂 IME both are very good and thin BTE, but quite different feeling knives — depends if you want something that’s like a scalpel or enjoy a little more meat to your blade.
 
Sumiiro is absolutely my favorite knife, I tried a regular 210 and I knew I had to get a k-tip nihei for the added height. I had a similar experience comparing it to my yoshikane, was mind blowing how smoothly it cut while looking chunky in comparison to my yoshi. I’ll leave a link here to the W#2 k-tip I have for sale if anyone wants to try a nihei, as long as that’s ok? I bought it before finding a k-tip Sumiiro, I can confirm it absolutely performs easily as well as the kono version!
https://www.kitchenknifeforums.com/threads/nihei-ku-w-2-210-gyuto.71278/#post-1103730
 

Attachments

  • 6B50D871-211B-49D6-939B-6422713C96E2.jpeg
    6B50D871-211B-49D6-939B-6422713C96E2.jpeg
    2.3 MB
Are they in stock anywhere other than protocoling and ai and om?
Dunno, got mine a couple of years ago from CKTG; believe I saw them at Tosho a while back. TBH, I've not used it as much as it deserves—I'm more a carbon guy, and the profile is a tad too flat for my tastes. Had originally bought it to be a travel knife to survive tropical humidity. It's a very well made knife.
 
The choil shot on these reminds me of my Kaeru Kasumi gyuto, also SLD/stainless clad, but obviously very different profile and finishing. Anybody have both and can compare?

Kaeru.jpg
 
The choil shot on these reminds me of my Kaeru Kasumi gyuto, also SLD/stainless clad, but obviously very different profile and finishing. Anybody have both and can compare?

View attachment 316279
I have a 240 kaeru and they are not similar nor comparable both in grind and steel (way harder on the sumiiro). I like the kaeru though.
I took a few shots of the sumiiro choil
 

Attachments

  • PXL_20240419_215150268~2.jpg
    PXL_20240419_215150268~2.jpg
    425.4 KB
  • PXL_20240419_214937857~2.jpg
    PXL_20240419_214937857~2.jpg
    449.8 KB
I have a 240 kaeru and they are not similar nor comparable both in grind and steel (way harder on the sumiiro). I like the kaeru though.
I took a few shots of the sumiiro choil
So what you're telling me is I need both...

What's differences do you see in the grind? My Kaeru has a bit of hollow above the blade road to a subtle shoulder, then has quite a bit of convexity down to a very thin edge (~0.20mm@1mm BTE).
 
So what you're telling me is I need both...

What's differences do you see in the grind? My Kaeru has a bit of hollow above the blade road to a subtle shoulder, then has quite a bit of convexity down to a very thin edge (~0.20mm@1mm BTE).
Sumiiro is harder and thinner behind the edge, feels very delicate on board like the thinnest yoshikane. You obviously need both 🤣🤣 they are both keepers
 
Back
Top