- Joined
- Aug 27, 2019
- Messages
- 4,429
- Reaction score
- 9,609
Let it be known I'm in for Devin with magnacut (even cooler with a dama/ sanmai) and a nice wa handle.
create something completely unique for KKF
Between Massdrop, HVB drop and possible Spåre ApexUltra MCX I am probably going to end up on street at the end of this year.
I could be wrong but I would suspect may not be possible. Wrought iron likes to forge weld at really hot temps (over 2300 ˚F) but it is quite possible that MagnaCut exhibits hot shortness when heated that high (over 2300 ˚F).MagnaCut / wrought iron San mai 300mm workhorse gyutos please. Business at the edge, party on the clad.
How sadI could be wrong but I would suspect may not be possible. Wrought iron likes to forge weld at really hot temps (over 2300 ˚F) but it is quite possible that MagnaCut exhibits hot shortness when heated that high (over 2300 ˚F).
I'm fairly certain that a @Kippington massdrop for his hook grind is a total non-starter based on his earlier responses to that proposal.
I nominate you to ask @Kippington if he’d be willing to make 100 of those in the next 9 months.
Don't forget to ask for a 30% discount.
Hmmm.... @Isasmedjan SerbIan Cleaver in mild steel?F u c k edge retention anyway. I wanna sharpen!
F u c k edge retention anyway. I wanna sharpen!
With the fingerbang hole.Hmmm.... @Isasmedjan SerbIan Cleaver in mild steel?
F u c k edge retention anyway. I wanna sharpen!
As if there's any other way?With the fingerbang hole.
Hmmm.... @Isasmedjan SerbIan Cleaver in mild steel?
With the fingerbang hole.
Don't forget the sticker. Must have the stickerAnd a burlap canvas micarta handle please.
Don't forget the sticker. Must have the sticker
And a burlap canvas micarta handle please.
And have @Isasmedjan pose like TF and put it on the knife box.Maybe as a KKF exclusive, it could also smell like smoke for a week?
Thinking more like a 360x200 cleaver made out of sandstone. Or just a bag full of sand maybe. Or a bag of vacuum (?!) .... Okay went a bit too far down that road.So using @Larrin edge retention data, you'd like a #6 cleaver (225x105) in 8670 hardened at 56HRC. Should need lots of sharpening and the height gives you life.
Enter your email address to join: