Hello All,
Here's what will likely be one of my last blades in SheffCut for the foreseeable future. It has a fine 2k finish and a curly walnut handle. I've given up trying to get good pictures of the hamon, but as you'll hopefully be able to see in the video, this blade has a tremendous amount of very subtle activity in it.
Here's what will likely be one of my last blades in SheffCut for the foreseeable future. It has a fine 2k finish and a curly walnut handle. I've given up trying to get good pictures of the hamon, but as you'll hopefully be able to see in the video, this blade has a tremendous amount of very subtle activity in it.
- Blade: 273mmx40mm SheffCut 64-65 hrc. 2000 grit finish, etched and polished to reveal the depth of the hamon
- Neck: 18mmx17mm
- Handle: Curly walnut oil finished and waxed
- POB: 64mm from the handle
- Spine: 3.00mm at the handle, 2.76mm at halfway, .69mm 1cm from the tip
- Grind: flat to convex RH bias
- Weight: 160g
- Relieved choil and spine
- Edge: .19mm@1mm, .31mm@2mm, .56mm@5mm, .92mm@10mm from the edge, measured at the midpoint,