Monosteel western handle Gyuto discussion thread

Japanese Knives - by Tokushu Knife
Miura knives
Kitchen Knife Forums

Help Support Kitchen Knife Forums:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Choppin said:
nice gang! who is the maker/brand behind the ones with purple label?

@Krouton yeah I really liked that Goko. If you like yo monosteels you won’t be disappointed. It’s a bit taller than most (52mm for a 240 IIRC), grind is really well executed and thin BTE (not just flat faces with chiseled edge like a Misono) and has the right kind of wabi sabi. The handle/scales F&F is kinda meh but not terrible. Overall one of the best monosteels out there IMO.

@blokey where did you get the 270 Masakane if I may ask?
Click to expand...
Thank you, I started in this hobby with some yo handled monosteels, moved away from them, and now I’m coming back around and really enjoying them. Sounds like I definitely need to check Goko out. Bernal has a couple 270 Masakanes btw
 
Last edited:
Choppin said:
nice gang! who is the maker/brand behind the ones with purple label?

@Krouton yeah I really liked that Goko. If you like yo monosteels you won’t be disappointed. It’s a bit taller than most (52mm for a 240 IIRC), grind is really well executed and thin BTE (not just flat faces with chiseled edge like a Misono) and has the right kind of wabi sabi. The handle/scales F&F is kinda meh but not terrible. Overall one of the best monosteels out there IMO.

@blokey where did you get the 270 Masakane if I may ask?
Click to expand...
Tetogi, I think they still have some available
https://tetogi.com/products/masakan...handle-no-bolster?_pos=1&_sid=29774809d&_ss=r
 
I love the Masahiro VC series. F&F are rudimentary, but nothing you can't address within a few minutes with a few grades of sandpaper. Steel and HT are remarkable, in its behaviour close to Aogami#2. A bit of bite, no brittleness, hardness close to 62Rc. Give it a good sharpening out of the box to get rid of the factory edge, ease its excessive asymmetry and thin it a bit. I start with a SG320.
 
Choppin said:
don’t mean to go off topic but I have a quick question… many of these gyutos have asymmetrical secondary bevels. Do you guys usually leave them as is, or convert to 50/50?

I just received a 180 Masakane that’s heavily asymmetrical. I’m thinking about at least thinning the right side a bit, essentially maintaining the secondary bevel’s angle but making it smaller.

View attachment 257575
Click to expand...
I'd reduce/convex the shoulder between the cutting edge and blade face personally.
 
HENCKELS Solution Razor-Sharp 7-pc Knife Set, Chef Knife, Bread Knife,German Engineered Informed by 100+ Years of Mastery, Brown
-43%
$79.99 $140.00
HENCKELS Solution Razor-Sharp 7-pc Knife Set, Chef Knife, Bread Knife,German Engineered Informed by 100+ Years of Mastery, Brown Amazon.com
KERYE Japanese Whetstone Sharpener Set - 400/1000 3000/8000 Grit Water Stones, Flattening Stone, Honing Guide, Cut Resistant Gloves
-21%
$34.93 $43.97
KERYE Japanese Whetstone Sharpener Set - 400/1000 3000/8000 Grit Water Stones, Flattening Stone, Honing Guide, Cut Resistant Gloves Woot
SHAN ZU Knife Set 16 pcs, Japanese Kitchen Knife Set with Block High Carbon Stainless Steel Ultra Sharp Knife Set for Kitchen, Professional Chef Knife Set with Sharpener
-50%
$99.99 $199.99
SHAN ZU Knife Set 16 pcs, Japanese Kitchen Knife Set with Block High Carbon Stainless Steel Ultra Sharp Knife Set for Kitchen, Professional Chef Knife Set with Sharpener Woot
S SATC Diamond Sharpening Stone 2 Side Grit 400/1000 Diamond Plate Honing Stone 8-inch Hone Sharpener White
$21.99
S SATC Diamond Sharpening Stone 2 Side Grit 400/1000 Diamond Plate Honing Stone 8-inch Hone Sharpener White abrasive
Knife Sharpening Stone - Dual Grit Whetstone 400/1000 3000/8000, Knife Sharpening Stone Set, Tpstone Knife Sharpener Tool,Easy to Use
$23.99
Knife Sharpening Stone - Dual Grit Whetstone 400/1000 3000/8000, Knife Sharpening Stone Set, Tpstone Knife Sharpener Tool,Easy to Use TPstone choice
Topfeel Professional Chef Knife Set Sharp Knife, German High Carbon Stainless Steel Kitchen Knife Set 3 PCS-8" Chefs Knife &7" Santoku Knife&5" Utility Knife, Knives Set for Kitchen
-20%
$28.79 $35.99
Topfeel Professional Chef Knife Set Sharp Knife, German High Carbon Stainless Steel Kitchen Knife Set 3 PCS-8" Chefs Knife &7" Santoku Knife&5" Utility Knife, Knives Set for Kitchen Y-our choices
Whetstone Sharpening Stone Kit Dual Sided 400/1000 Grit Professional Whetstone Knife Sharpener Stone Wet Stone Set Nonslip Rubber Base
$9.99
Whetstone Sharpening Stone Kit Dual Sided 400/1000 Grit Professional Whetstone Knife Sharpener Stone Wet Stone Set Nonslip Rubber Base Queen Store
IBEIKE 7-Piece Kitchen Knife Set, Professional Japanese Kitchen Knives, High Carbon Stainless Steel Sharp Blades with Well Balanced and Ergonomic Wood Handle for Chef Knife Set
$69.99
IBEIKE 7-Piece Kitchen Knife Set, Professional Japanese Kitchen Knives, High Carbon Stainless Steel Sharp Blades with Well Balanced and Ergonomic Wood Handle for Chef Knife Set IBEIKE-The world of knives from Japan
Piklohas Kitchen Knife Sets For Kitchen With Block, 17 Pieces With Magnetic Knife Holder, German High Carbon Stainless Steel Damascus Pattern Chef Knife Set With Sharpener, Steak Knives
-16%
$159.99 $189.99
Piklohas Kitchen Knife Sets For Kitchen With Block, 17 Pieces With Magnetic Knife Holder, German High Carbon Stainless Steel Damascus Pattern Chef Knife Set With Sharpener, Steak Knives Piklohas Kitchen Knife
HOSHANHO 8-Piece Kitchen Knife Set, Japanese AUS-10 Super Steel Knife Set with Block, Professional Ultra Sharp Chef Knife Set with Scissors
-23%
$199.99 $259.99
HOSHANHO 8-Piece Kitchen Knife Set, Japanese AUS-10 Super Steel Knife Set with Block, Professional Ultra Sharp Chef Knife Set with Scissors HSH-DE
MIDO PROFESSIONAL ABRASIVE Knife Sharpening Stone 400/1000 Whetstone Sharpening Stone with Non-Slip Rubber Base for Kitchen, Hunting, and Pocket Knives or Blades
$9.99
MIDO PROFESSIONAL ABRASIVE Knife Sharpening Stone 400/1000 Whetstone Sharpening Stone with Non-Slip Rubber Base for Kitchen, Hunting, and Pocket Knives or Blades miduguoji
Sharp Pebble Premium Whetstone Knife Sharpening Stone 2 Side Grit 1000/6000 Waterstone- Whetstone Knife Sharpener- NonSlip Bamboo Base & Angle Guide
$39.99
Sharp Pebble Premium Whetstone Knife Sharpening Stone 2 Side Grit 1000/6000 Waterstone- Whetstone Knife Sharpener- NonSlip Bamboo Base & Angle Guide MIGHTY DREAMS
HiramWare Knife Sharpening Stone with Non-slip Rubber Base, 400/1000 Grit Premium Whetstone, Double-Sided Knife Sharpener for Kitchen, Waterstone for Honing Blades Manually
$8.99
HiramWare Knife Sharpening Stone with Non-slip Rubber Base, 400/1000 Grit Premium Whetstone, Double-Sided Knife Sharpener for Kitchen, Waterstone for Honing Blades Manually Hiram Deals
MOSFiATA Kitchen Knife Set, 12 Pcs Japanese Stainless Steel Knife Sets for Kitchen with Oxford cloth storage bag with Knife Sharpening Rod, Dishwasher Safe, For Outdoor
$79.99
MOSFiATA Kitchen Knife Set, 12 Pcs Japanese Stainless Steel Knife Sets for Kitchen with Oxford cloth storage bag with Knife Sharpening Rod, Dishwasher Safe, For Outdoor iHome888
Aovemt sharpening stone - 400/1000/6000 Grits, Leather Strop, Polishing Compound, Flattening Stone - Ideal for Chefs, Knife Enthusiasts, and Kitchen Knives (whetstone/wet stone)
$18.99
Aovemt sharpening stone - 400/1000/6000 Grits, Leather Strop, Polishing Compound, Flattening Stone - Ideal for Chefs, Knife Enthusiasts, and Kitchen Knives (whetstone/wet stone) Aovemt US
PROFYKNIFE PrecisionEdge 5 Piece Knife Set Ultra Sharp Japanese Chef Knife Set Professional with Ergonomic Red Pakkawood Handles Japanese Kitchen Knives Sets without block High Carbon Stainless Steel
PROFYKNIFE PrecisionEdge 5 Piece Knife Set Ultra Sharp Japanese Chef Knife Set Professional with Ergonomic Red Pakkawood Handles Japanese Kitchen Knives Sets without block High Carbon Stainless Steel PROFYKNIFE
zongchuan 5 PCS Damascus Chef Knife Set, Ultra-Smooth Cutting Experience and Professional Grade Sharp, Kitchen Knife Set,Handle Ergonomic Design,9CR18MOV High Carbon Stainless Steel,Dishwasher Safe
$69.92
zongchuan 5 PCS Damascus Chef Knife Set, Ultra-Smooth Cutting Experience and Professional Grade Sharp, Kitchen Knife Set,Handle Ergonomic Design,9CR18MOV High Carbon Stainless Steel,Dishwasher Safe ZongChuan Official Store
Knife Sharpening Stone Kit, 4 Side Grit 400/1000 3000/8000 Whetstone, Professional Whetstone Knife Sharpener Set Includes Polishing Compound, Bamboo Base, Flattening Stone, Leather Strop & Angle Guide
-50%
$16.49 $32.99
Knife Sharpening Stone Kit, 4 Side Grit 400/1000 3000/8000 Whetstone, Professional Whetstone Knife Sharpener Set Includes Polishing Compound, Bamboo Base, Flattening Stone, Leather Strop & Angle Guide PMNPU-US
YeopAsda Knife Sharpening Stone Set - Premium 4 Side Grit 400/1000 3000/8000 Whetstone Sharpener Kit - Non-Slip Bamboo Base,Cut Resistant Gloves, Angle Guide,Flatting Stone,Honing Guide,Leather Strop
$39.99
YeopAsda Knife Sharpening Stone Set - Premium 4 Side Grit 400/1000 3000/8000 Whetstone Sharpener Kit - Non-Slip Bamboo Base,Cut Resistant Gloves, Angle Guide,Flatting Stone,Honing Guide,Leather Strop YeopAsda
HENCKELS Premium Quality 15-Piece Knife Set with Block, Razor-Sharp, German Engineered Knife Informed by over 100 Years of Masterful Knife Making, Lightweight and Strong, Dishwasher Safe
-65%
$122.10 $345.00
HENCKELS Premium Quality 15-Piece Knife Set with Block, Razor-Sharp, German Engineered Knife Informed by over 100 Years of Masterful Knife Making, Lightweight and Strong, Dishwasher Safe Amazon.com
Choppin said:
don’t mean to go off topic but I have a quick question… many of these gyutos have asymmetrical secondary bevels. Do you guys usually leave them as is, or convert to 50/50?

I just received a 180 Masakane that’s heavily asymmetrical. I’m thinking about at least thinning the right side a bit, essentially maintaining the secondary bevel’s angle but making it smaller.

View attachment 257575
Click to expand...
Is quite extreme, indeed. Have seen similar with Suien VC. Obviously, the end user is supposed to put his own edge on it. I agree with @M1k3 and would indeed turn the right bevel into a convex one to make it flush with the right face. For the left side, much depends on the user and how much one needs compensation for steering. You may start with a small straight bevel at a much higher angle than the right one.
 
Choppin said:
@Benuser @M1k3 thank's, I think I'll do just that - convex the right side, blending the secondary bevel into the blade face, and sharpen the left side at the same angle it is right now (much more acute than the right side)
Click to expand...
I suggested to sharpen the left bevel at a much higher angle. The idea is to balance the friction on both sides. As the edge is off-centered to the left, friction is higher on the right side, causing clockwise steering. You may reduce it by thinning the right side and adding some friction to the left one. That's the sense of a straight bevel at a higher angle.
 
Krouton said:
All show out of stock already
Click to expand...
Sometimes at JNS items show OOS when they first come up to the website but then they update to "in stock". We'll see.

Yeah, they look exactly like the vintage Sakai Kikumori Swedish carbon I had... maybe same maker?

It was a 210 gyuto, 80/20 bevels, 43mm tall, smallish handle and on the flexier spectrum for mono steel gyutos. Steel was great, a joy to thin and sharpen.
 
Choppin said:
Sometimes at JNS items show OOS when they first come up to the website but then they update to "in stock". We'll see.

Yeah, they look exactly like the vintage Sakai Kikumori Swedish carbon I had... maybe same maker?

It was a 210 gyuto, 80/20 bevels, 43mm tall, smallish handle and on the flexier spectrum for mono steel gyutos. Steel was great, a joy to thin and sharpen.
Click to expand...
Appreciate it, I haven’t bought from them before but that makes sense
 
Choppin said:
Sometimes at JNS items show OOS when they first come up to the website but then they update to "in stock". We'll see.

Yeah, they look exactly like the vintage Sakai Kikumori Swedish carbon I had... maybe same maker?

It was a 210 gyuto, 80/20 bevels, 43mm tall, smallish handle and on the flexier spectrum for mono steel gyutos. Steel was great, a joy to thin and sharpen.
Click to expand...
A narrow 210? Brass rivets, Swedish Carbon? Sure it's no Misono?
 
Benuser said:
A narrow 210? Brass rivets, Swedish Carbon? Sure it's no Misono?
Click to expand...
I found some pics, here it is. Got it from Bernal like 2-3 years ago.

1690390638489.jpeg


1690390624040.jpeg
 
Benuser said:
I suggested to sharpen the left bevel at a much higher angle. The idea is to balance the friction on both sides. As the edge is off-centered to the left, friction is higher on the right side, causing clockwise steering. You may reduce it by thinning the right side and adding some friction to the left one. That's the sense of a straight bevel at a higher angle.
Click to expand...
I made a video trying to show the bevels as they are now. Looks like the right bevel was sharpened at a much lower angle than the left one. The edge looks off-centered to the left.

You are suggesting to sharpen the left bevel at an even higher angle than it is right now? Or just keep the current angle (which is already higher than the right bevel). Just trying to understand as this is my first time working on a knife with asymmetrical bevels.

PS: @blokey just let me know if we are going off topic to much and I'll make this conversation private.
 

Attachments

  • IMG_1548.mov
    21 MB
Choppin said:
I made a video trying to show the bevels as they are now. Looks like the right bevel was sharpened at a much lower angle than the left one. The edge looks off-centered to the left.

You are suggesting to sharpen the left bevel at an even higher angle than it is right now? Or just keep the current angle (which is already higher than the right bevel). Just trying to understand as this is my first time working on a knife with asymmetrical bevels.

PS: @blokey just let me know if we are going off topic to much and I'll make this conversation private.
Click to expand...
Yes, higher angle on the left side. If you were to sharpen both sides at the same angle, it would steer. If you sharpen the right side at a low angle (10-15° or so) and the left side at a higher angle (15-20° or so) you'll reduce or eliminate the steering.
 
Benuser said:
A narrow 210? Brass rivets, Swedish Carbon? Sure it's no Misono?
Click to expand...
Now I already linked you to the newest kkf vendor Hata Knives once lmao because I think you might like their inventory.
https://www.kitchenknifeforums.com/threads/hata-knives-introduction.66305/
They have vintage masamotos and Misonos occasionally.
Here’s one old school Misono but who knows if they’re from the same era as the JNS Sukehisas.
https://www.hataknives.com.au/product-page/vintage-misono-kiritsuke-210mm
I’ve heard stories from old heads about how amazing old Masamotos were (90s, 2000s) compared to the one’s currently produced. I’d be quite interested in picking up some OG Misono EOM seeing as that was the era where they were building their brand and reputation. Perhaps there are differences between then and now. But I’m not sure, just speculating
 
Choppin said:
I made a video trying to show the bevels as they are now. Looks like the right bevel was sharpened at a much lower angle than the left one. The edge looks off-centered to the left.

You are suggesting to sharpen the left bevel at an even higher angle than it is right now? Or just keep the current angle (which is already higher than the right bevel). Just trying to understand as this is my first time working on a knife with asymmetrical bevels.

PS: @blokey just let me know if we are going off topic to much and I'll make this conversation private.
Click to expand...
No worries, I think it is nice to have a discussion about these mono westerns.
 
blokey said:
I’m really getting into monosteel western handle gyuto recently, having a Masakane 270 s route and considering either one from Sugimoto, Ichimonji White #2, Masahiro VC or Kiya #6
Click to expand...
Have you received your Masakane yet? After receiving my 180 I'm considering a 270 to complement it...
 
Choppin said:
Have you received your Masakane yet? After receiving my 180 I'm considering a 270 to complement it...
Click to expand...
Eh, bit of complication this time, 270mm gyuto technically violated some knife law here so it is still stuck in the custom, I fear it might be confiscated. Usually there won’t be problem since they can’t check every package but DHL is probably too honest with their description this time.
 
blokey said:
Since Bernal is going to have 20% off sale soon, it is a chance to grab some nice monos, they have NOS Masakane, Naozumi, Kikumori Nihonkou and Morihei Hagane

I’m quite interested in Morihei Hagane, it is described as in SKS steel, a SK variant with added vanadium.
https://bernalcutlery.com/collectio...i-hisamoto-hagane-240mm-gyuto-sk-pakka-handle
Click to expand...
Very strong right hand bias. Convexing on the right side seems hand ground, better than a lot of the widely available SK gyutos like Sakai Kikumori. Steel is solid, a bit keener than typical SK, but not a world of difference. They grind the edge bevel at the tip wider as you can see in the pics to compensate for the tip not being extra thin I think, although it’s thin enough. Thinner BTE than a Masahiro or Sakai Kikumori OOTB, not as thin as an Ashi. Handle is on the lighter/smaller side for a slightly more forward balance.
 
Good spot regarding the steel. I'd never paid attention and always assumed it was a regular SK3-5. Makes sense as @labor of love says, Josh likes his Kanto gyutos and seems very fond of these and the sort of edge they will take and hold.

blokey said:
Since Bernal is going to have 20% off sale soon, it is a chance to grab some nice monos, they have NOS Masakane, Naozumi, Kikumori Nihonkou and Morihei Hagane

I’m quite interested in Morihei Hagane, it is described as in SKS steel, a SK variant with added vanadium.
https://bernalcutlery.com/collectio...i-hisamoto-hagane-240mm-gyuto-sk-pakka-handle
Click to expand...
 
Last edited:
Lol maybe there should be a western handle monosteel Japanese gyuto thread for old stock stuff like this haha. Anyway about the sukehisa, it's a good steel for their regular line, slightly keener and better and harder than masakane but still similar. I don't tend to find a crazy difference between steel lines for the same maker but idk. Like tf white vs aogami super, still similar to me. Or goko SK vs white. Or Ashi white and stainless can kinda feel similar ish. I've been meaning to try the sukehisa swedish, though I've seen a couple. They did do OEM stuff too, so maybe old stock will come up under other names
 
refcast said:
Lol maybe there should be a western handle monosteel Japanese gyuto thread for old stock stuff like this haha. Anyway about the sukehisa, it's a good steel for their regular line, slightly keener and better and harder than masakane but still similar. I don't tend to find a crazy difference between steel lines for the same maker but idk. Like tf white vs aogami super, still similar to me. Or goko SK vs white. Or Ashi white and stainless can kinda feel similar ish. I've been meaning to try the sukehisa swedish, though I've seen a couple. They did do OEM stuff too, so maybe old stock will come up under other names
Click to expand...
I bought one, if you are interested I can lend it to you after I’m back in US
 
You must log in or register to reply here.

Latest posts

Back
Top